D200 Downlight

Performance & Glare. Mastered.

Two Trim Colours

Choose from a custom engineered white or black trim.

25W Luminaire

Total system power usable including lamp & driver.

Up to 3640lm1

Powered by X-Drive Pro 2 lighting engine technology.

Up to 98 CRI2

Extremely accurate colour rendering with StudioTM Tech

Ultra Low Glare10

Enabling a smooth & comfortable light source.

10-Year Warranty2

Premium warranty to protect your product for years to come.

4 Optic Options

Choose from 20, 40, 60 and 80 degree optics.

IP65 Protection4

Suitable for Interior & covered exterior lighting environments.

D200 Highlights

Product Highlights

Strong, Balanced Springs

Strong, yet easy to install

To ensure that we firmly hold the weight of the product, Visionary incorporated a full aluminum spring jacket with a high tensile steel spring coil to ensure that the product stays firm in the ceiling, yet it easy to install and remove.  

Ultra Low Glare Optic

Superior eye comfort

Glare reduction is really important for human comfort and productivity. Through optical engineering and a deep recessed optical topology, we're able to provide a recessed luminaire with incredible performance but without excessive glare.

Two Lens Options

Diffused or focal.

Two lens options are available to cater for a wide array of applications and customer requirements. Focal style optics are designed to minimise glare and optically control the light into a specific beam angle (20, 40 or 60 degrees). The diffused models are designed for wider beam angle requirements where light throw is of greater importance than glare management.


Beautifully Versatile

D200 was engineered to embody the perfect balance between form and function. This is achieved through the use of premium materials, its high accuracy powder coating process with custom colour palettes to match common ceiling tones, and its enlarged - yet tapered trim to cover older light fitting ceiling marks.

Product Trim Colours



Trim Colours






Cutout Range


Insulation. We’ve Got You Covered.

Through advanced thermal design and highly efficient lighting engines, we’re able to offer the highest thermal safety compliance on a recessed luminaire with IC-F and IC-4. Put simply, this means that the product can safety be abutted & covered by insulation.

Thermal Safety Ratings


Set the Mood with Colour.

Set the mood of your room space with 4 different lighting engine models to choose from. All lighting engines also incorporate Visionary’s Tru-Colour lighting technology and 3-SDCM colour binning to ensure that light colours are the same for every batch - every time.






X-Drive ProTM 2

Traditional LED topologies trade off colour rendering for lighting efficacy. This means a typical 80 CRI LED will have a higher efficacy than its 90 CRI counterpart. However, the trade-off is the 90 CRI counterpart will render colour more accurately. X-Drive Pro 2TM utilises breakthrough technology to enable extremely high lighting efficacy which is the same or better than traditional 80 CRI LED's - but at 90+ CRI4. X-Drive Pro 2TM technology boasts a no compromise solution for where premium colour rendering, and extreme light performance is a must.

Control gear

Premium Quality Driver Platform

LED drivers are the essence of our LED lighting solutions, and their performance is crucial. At Visionary, we exclusively employ LED driver technology that meets our stringent standards. Our focus is on extended design life, minimal harmonics, superior assembly quality, and ensuring a smooth, flicker-free experience. These elements are key in our product selection process.


Driver Life (Hrs)8


Trailing Edge

1 Metre

Cable + Plug

7 Year



Studio Technology

Studio TechnologyTM brings out true colours and textures for an extremely accurate experience where colour matters most. Compared to conventional LED and Fluorescent lighting, Studio provides a much greater spectrum of colour that is far more accurate than traditional LED lighting13. Studio TechnologyTM enables a colour rendering index as high as 98CRI3. This is made possible through the use of advanced LED phosphor and die design to minimize light scattering. This maximizes contrast and 3D-dimensional effects of objects to ensure they are seen at their best. This results in a natural and continuous spectrum that is very close to that of sunlight.

Learn More

98 CRI

High Definition Rendering


Model Option

MedLight Technology

MedLight technology, in compliance with AS/NZS 1680.2.5:2018 Section 7 and boasting a COI of 3.3 or less along with a 98 CRI, exemplifies state-of-the-art lighting innovation. It employs an expertly engineered diode-phosphor blend to adjust LED spectral emission, diminishing blue light intensity while enhancing red wavelengths, crucial for precise cyanosis detection. Scientifically validated, this technology facilitates quicker sleep initiation, superior visual comfort, and adheres to the highest standards of ocular safety in the sector.




Visionary Technologies reserves the right to make changes to this document and the product described herein, at anytime, without obligation on Visionary to provide notification of such change. All functionality, features, specifications and other product information provided in this document including, but not limited to, the benefits, design, pricing, components, performance, availability, and capabilities of the product are subject to change without notice or obligation.The brands mentioned on this website are the property of their respective owners and are used for informational purposes only. These brands are not affiliated with Visionary Technologies Ltd, and their mention does not imply any partnership or endorsement by them.

  1. The light output statistic provided represents the best possible performance measured, subject to a ±7% tolerance. This figure is intended for guidance only and may vary due to factors such as optical, power, and electromechanical variances. For more detailed and specific information, refer to the product datasheet.
  2. Product warranty disclosure statements and full details can be found by viewing our Warranty Documentation, Guardian Service Agreements for commercial and residential products and by viewing our terms of service. All documentation can be found on the Visionary Technologies website under the support menu.
  3. All CRI values are measured at Tj = Tc = 25°C.CRI values are typical. Visionary maintains a ± 3 tolerance on CRI values.
  4. Visionary IP65 Products are splash, water, and dust resistant and were tested under controlled laboratory conditions with a rating of IP65 under IEC standard 60529. Splash, water, and dust resistance are not permanent conditions. Resistance might decrease as a result of normal wear. Liquid damage not covered under warranty. IP Rating refers to the front of the lamp. The Rear of the Lamp is IP40.
  5. 304 stainless steel, used in our products, offers enhanced corrosion resistance but is not impervious to all corrosion types. Visionary Technologies Ltd is not liable for corrosion damage due to environmental factors, improper maintenance, or use. Please consult our guidelines for optimal product care.
  6. Surge capability, particularly in the context of lighting products and accessories, relates to the ability of electrical devices to withstand sudden increases in voltage or current without damage. The terms "L-N" and "L-FG/N-FG" refer to different types of surge events. "L-N" (Line to Neutral) signifies a surge between the active(line) and neutral conductors, a common scenario in AC power systems. Conversely, ",L-FG/N-FG" (Line to Frame Ground/Neutral to Frame Ground)describes surges that occur between the line or neutral and the frame ground(protective earth), representing different pathways through which electrical disturbances can affect equipment. Meeting the Performance Criterion B indicates that the device can sustain a specific level of surge without functional degradation or loss of structural integrity, ensuring reliability and safety in varying electrical environments, especially pertinent in regions like New Zealand with its specific electrical standards and requirements.
  7. Flicker Index (IEEE 1789): As defined under IEEE Standard 1789, this index measures the fluctuation in brightness of light sources, crucial for compliance with various health and safety regulations. Under IEEE Standard 1789 for LED lighting, a flicker index of less than 0.1 is generally considered "flicker-free." This standard indicates that lighting with such a low flicker index is unlikely to be perceptible or cause health issues related to flicker, such as eye strain or headaches.
  8. LED Driver Lifespan (in Hours): The estimated lifespan of LED drivers, commonly ranging from 50,000 to 100,000 hours, is based on ideal usage conditions. This estimation is subject to variations due to real-world factors, notably thermal conditions and ambient temperature, along with voltage fluctuations and usage patterns. Excessive heat can significantly reduce the lifespan of LED drivers. As per New Zealand law, manufacturers, including Visionary Technologies Ltd, must convey that these hour-based lifespan figures are approximations and not absolute guarantees, reflecting typical performance under optimal conditions.
  9. This product has achieved an IK09 rating, indicating a high level of protection against mechanical impacts as per the EN 62262 standard. While IK09 denotes resistance to impacts of up to 10 joules, it does not imply immunity to all physical damage. This rating specifically addresses impact resistance and does not cover other types of mechanical stress or environmental conditions. Users and installers should note these limitations in accordance with New Zealand's product safety and consumer information regulations, understanding that the IK09 rating does not encompass all possible damage scenarios.
  10. Visionary Technologies Ltd defines 'Low Glare' in accordance with a Unified Glare Rating (UGR) of 19 or below. This rating is calculated based on specific parameters: a ceiling/cavity reflectance of0.7,wall reflectance of 0.5, and a working plane reflectance of 0.2, within a room context defined by dimensions X = 4H and Y = 12H.
  11. L70 TM-21 Lifespan Calculations and Limitations:L70 TM-21 refers to a specific methodology for predicting the lifespan of LED lighting, where L70 indicates the point at which light output drops to 70% of its original brightness. TM-21 calculations, endorsed by the Illuminating Engineering Society (IES), extrapolate long-term performance from shorter-term tested data. However, these calculations come with limitations; they are estimates and may not account for all real-world variables such as temperature fluctuations, usage patterns, and power quality.
  12. Visionary Technologies offers mounting options suitable for various common applications. However, compatibility with all third-party products cannot be unequivocally guaranteed. Customers should verify compatibility with non-Visionary products independently.
  13. Traditional lighting refers to commonly used B+YR LED technology at 80 CRI.


Request a Membership